Junos route policy

Note: When you specify an action that manipulates the route characteristics, the changes occur in a copy of the source route. The source route itself does not change. The effect of the action is visible only after the route is imported into or exported from the routing table. To view the source route before the routing policy has been applied, use the show route receive-protocol command. To view a route after an export policy has been applied, use the show route advertised-protocol command.


 http://www.juniper.net/documentation/en_US/junos13.3/topics/usage-guidelines/policy-configuring-actions-in-routing-policy-terms.html

Junos alternative show ip cef

Cisco style:
r3#sh ip cef 172.16.0.240
172.16.0.240/32
  nexthop 10.43.0.1 GigabitEthernet0/1.43

Junos style:
eol@R2> show route forwarding-table detail matching 10.1.1.1
Routing table: default.inet
Internet:
Destination        Type RtRef   Next hop         Type    Index     NhRef           Netif
10.1.1.1/32        user     0          1.1.1.1            ucst     542         4               ge-0/0/0.0